Wemos D1 / DHT22 + BM180 logger housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New version for less temperature difference due to ESP heating In this version a measure ca. 0.3°C difference between…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 645
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
New version for less temperature difference due to ESP heating
In this version a measure ca. 0.3°C difference between an open (breadboard) design and the D1 and the sensors in this housing.
In the old version it was around +6°C delta.
This is a remix from https://www.thingiverse.com/thing:398515
Additional space for a BMP 180 temperature / pressure sensor
Pro-Tip: use an 10k resistor as PullUp from 5V on the D2 pin when using the BMP180, otherwise the ESP will continuosly restart.
Printable in PLA without supports.
You can probably do the cable soldering cleaner, it was just a quick mock up, sorry :)
As always, also the Solidworks and Step-Files, if you want to modify it.
Have fun,
Sebastian
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25
Filament: noname PLA white
Notes:
Any material does the trick.
Category: Electronics