75cm Wind-Power-Plant as desk fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
75cm high wind-mill model with motor works great as indoor fan with an gear motor I used a maxon 24V gearmotor with…
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 322
- Wydruki
- 0
- Wyświetlenia
- 2517
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
75cm high wind-mill model with motor
works great as indoor fan with an gear motor
I used a maxon 24V gearmotor with Dia22mm and 4mm shaft
In my version all printed in PLA without support
fits within a 19cm x 19cm print bed (diagonally)
(I mounted the blades with the straight side to the back, to use it a desk fan)
Gearmotor is just pressed in, Rotor also just pressed on shaft by hand
I included the Solidworks and Step-Files, if you want to change something.
Works probably also as scenery for H0 scale, I added a small door in the tower. Pole height on H0 would be ~44m
Have fun,
Sebastian
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament: BasicFil PLA white
Category: Buildings & Structures