Brio Compatible Standard "H1" Cross Track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of the standard Brio compatible "H1" cross track.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My version of the standard Brio compatible "H1" cross track.
H1 is a strange piece with a very specific use. It is a cross track but the opposite ends have the same connector (male-to-male, and female-to-female). It's straights are 116mm long, which does not match any BRIO standard pieces.
It's designed to form a cross from two or more curved switch tracks. You can fit H1 inside the space of an L and M joined at the curved end, so that the straight tracks cross while the curved tracks form a quarter circle. It can also fit inside the gap formed by joining two I and two J switches together at their curved ends, to make a very large "star" switch.
Print Settings
Rafts: No
Supports: No
Resolution: Any
Infill: Any
Filament: Any