1 / 1
30mm/0.2mm pinhole, (f150, 90 degrees) Pinhole Camera Cone for the Hasselblad film magazine mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 30mm/0.2mm pinhole, (f150, 90 degrees) Pinhole Camera Cone for the Hasselblad film magazine mount
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 192
- Wydruki
- 1
- Wyświetlenia
- 2439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (64)Powiązane
If you have printed https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt then you can print this cone and get a 30mm/0.2mm pinhole, i.e. f150, 90 degree angle pinhole camera.
Material
- PETG, e.g by Add:north
- Loctite Super Glue
- Pinhole of size 0.2mm (f=150), I recommend https://realitysosubtle.fr/buy-pinholes/
- You need to finish a https://www.gutsycaptain.com/ to get that cap. If you go for another colour, make sure it blocks the light.
Instructions
- The cone need to be printed using support on the plate.
- Glue the cone to the seal.
Do you like it? Please consider to buy me a cup cup of coffee. Thank you!