1 / 1
30mm/0.2mm pinhole, (f150, 90 degrees) Pinhole Camera Cone for the Hasselblad film magazine mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 30mm/0.2mm pinhole, (f150, 90 degrees) Pinhole Camera Cone for the Hasselblad film magazine mount
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 192
- Makes
- 1
- Views
- 2,439
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have printed https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt then you can print this cone and get a 30mm/0.2mm pinhole, i.e. f150, 90 degree angle pinhole camera.
Material
- PETG, e.g by Add:north
- Loctite Super Glue
- Pinhole of size 0.2mm (f=150), I recommend https://realitysosubtle.fr/buy-pinholes/
- You need to finish a https://www.gutsycaptain.com/ to get that cap. If you go for another colour, make sure it blocks the light.
Instructions
- The cone need to be printed using support on the plate.
- Glue the cone to the seal.
Do you like it? Please consider to buy me a cup cup of coffee. Thank you!