Counting matching models…
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
Do you like it? Please consider to buy me a cup cup of coffee . That would make my day! UPDATES 2023-05-05 Do you want to replace the cap with a shutter? Then have a look at Thomas1234 shutter:…
rest the larger opening on the print bed and print with brim and no supports. preferred layer height is 0.1mm but also 0.15 mm will work. Print instructions print with no supports and brim by resting on the larger opening.
Protective cover for Hasselblad magazines 12, A12, A16, A24 etc. Snaps into place on a magazine. Locks the dark slide into place. Printing Tested printed in ABS and PLA with 0.2mm layer height.
ALPA Back Adapter for Hasselblad V Mount Type.1 update2025/02/22 fix flange distance add winding gear for a12/a24/c24 back update2024/10/20 change upload file to right one
Front lens cover for Hasselblad Carl Zeiss Planar T* f2.8/80mm FE. I've included the following versions With logo: Can be printed with 0.40 mm nozzel otherwise the logo wont be printed correctly. A layer height of 0.15mm or lower is…
A rear cover for Hasselblad 500 Series (V System) cameras. After not finding any suitable models online I designed one of my own based on measurements from a camera body. Print Instructions Print with flat back against bed, no supports.…
Hot shoe adapter to the accessory rail on the 500cm. Everything is mostly friction fit, lock for extra security (optional). Edit (4/11/2022): Apologies to all that have downloaded. I just realized that I uploaded the older revision by…
If you've printed my adaptor to use 35mm film in a Hasselblad A24 magazine you will find this viewfinder frame a useful aid when taking photos. It masks to a 2.3:1 aspect ratio and should be orientated vertically under the viewfinder…
This is a Focusing handle for Zeiss 80mm V system lens. I used a 4-40 x ¾ socket cap screw along with a standard 4-40 brass hex nut.
I wish Hasselblad made a better viewfinder mask for shooting with 907x CFV II 50C digital back on old analog body so I made mine. There are several similar models available here and there, but these are complete set of all crop formats…
The dark slide snaps in place in the holder. Clip the holder on e.g. Shoulder straps Belts Camera bag dividers Pockets etc. ------------------------------------------------------------ Print in the default orientation without supports .…
I picked up a Keks light meter that comes with three cold shoe width options. I also have another camera that I am going to use it on whose cole shoe is metal, so that set the width of the cold shoe to the 18mm wide option. This version…
To protect your darkslide. Print the two files, glue them together with Loctite Super Glue. It's a snug fit and the holder won't fall off. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution:…
Rear cap for Carl Zeiss Lenses for the Hasselblad V-System. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15% Filament: Prusament PETG Category: Camera
This is a mask for the Hasselblads Viewfinder. It is meant for use with an A16 film back to support composition in 645 format. It fits perfectly between die matte screen and a Prism or Waistlevel Viewfinder. Feel free to remix or redesign…
If you have printed https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt then you can print this cone and get a 30mm/0.2mm pinhole, i.e. f150, 90 degree angle pinhole camera. Material PETG, e.g by…
This adapter will allow you to use your 49mm or 52 mm filter on a Hasselblad lens, having a B50 bayonet. In addition, you can still use the original lens hood without interference. Print instructions Category: Camera Print Settings…
Template for (laser-)cutting your own replacement leatherette for the body of an old Hasselblad 500 EL/M camera. Print instructions When lasercutting thin leather, I'd recommend taping it to a piece of MDF using double-sided tape, so it…
ALPA / ARRI Mount Hasselblad CW winder style right hand grip takes M6x10 and 1/4UNC screw
This is a simple, yet practical mount to fix remote triggers to a Hasselblad 500x or 503x Body. It can be put onto and removed from the camera very quickly and is sturdy enough to hold bulky studio-grade remote triggers. Print in 0.15 and…
ALPA Viewfinder hasselblad 903swc Style Use viewfinder from instax mini7s plus first element of the viewfinder from instax wide 200 same angle of view as swc
I nearly bought two hasselblad CT* lens but have neither caps. I did not find B50 cap here so I deside to make myself. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.2 Infill: 20…
Xmas Hassy Decorative Christmas tree decorations for camera lovers and technology enthusiasts. There is a small hole for a string or hook to hang it on your Christmas tree. Optimal: Print the model standing on the back so you can print…
Print without support. 0.30 mm draft. Optional: Brush surface with fine sandpaper and steel brush. Do you like it? Please consider to buy me a cup cup of coffee .
ALPA Back Adapter Hasselblad H Mount Type 2
In the run up for World Pinhole Day at the end of April I was asked by a friend if I could print a pinhole body cap for them. I searched for a 3D model to modify but none were freely available. I took it upon myself to take measurements…
This is the second model (of three) that I designed for an alternative to Hasselblad's ORM spirit level. This version is the closest in look to the OEM version made by Hasselblad, and it fits nicely on the various camera model's accessory…
Hasselblad 500 Medium Format Camera. my 500c is collecting dust … which is sad. This would be fun turned into a pinhole camera.
Convert your hasselblad 500el/500elm to manual camera need M2*6 extra screw Category: Camera
This is a custom made handle/battery-door lock for the Hasselblad 500 EL/M, which does not require a coin or screwdriver to open. Print instructions Printed the parts using PLA with a layer height of 0.2mm. The holes in this design are…
The frame is printed in PLA with 0.15 resolution (sunlu matte black) while the lock is printed in PETG, because of small walls and mechanical needs. With my printer the frame is a snug fit for the focusing screen, The walls are tapered…
All in all, I loved this light and portable set up. Great inspiration + starting point from @Spotmatic. It is a night and day difference compare to my Hasselblad 500cm + 60mm distagon. With a bit of practice, the 65mm Mamiya sekor is an…
tested with Imacon 132C Hasselblad V mount for Imacon digital back STEP file: https://grabcad.com/library/hasselblad-v-mount-for-imacon-digital-back-1 Category: Camera
Escura says: “The Escura Hasselback for Hasselblad allows shooting Fuji Instax Mini & Square instant formats giving complete control over exposure and framing allowed by the Hasselblad system. It is the first fully compatible instant film…
A template for cutting leather/fabric or other materials to replace the worn out leatherette on a Hasselblad V-System Waistlevel-Viewfinder. Print instructions When lasercutting thin leather, I'd recommend taping it to a piece of MDF…
This is a darkslide holder that adheres to the back of an A12 film holder with adhesive (glue, tape, velcro, etc.). Since it is designed to fit over the existing film box end tab holder I included a new one on the back of the holder. In…
Maske für die Hasselblad V-Serie, zu platzieren über der Sucherscheibe. Die Maske hat den Ausschnitt 35 x 56 mm, wenn man den Kleinbildfilm mit den Sprocketholes belichten will. Gedruckt in PLA mit 100 % Füllung damit die Maske halbwegs…
ALPA Back Adatper to Hasselblad H Mount
Hasselblad H Mount Male [STEP]
I made this mask solid because I feel more immersed composing and not seeing the “uncropped” part of the image. It is meant to just sit on the focusing screen and has grooves for both landscape and portrait if you would like to take…
Work In Progress Battery adapters for Hasselblad 500 EL/ELM/ELX. 9V Adapter This adapter comes in two parts. Required parts 9V connector (As thin as possible) More…
I tried to fit the aesthetic of the 500EL with a quick and easy 3D print that will improve visibility of the focusing screen if you're without a viewfinder for your Hasselblad. Print requires no support, standard settings will work fine,…
A Gridfinity holder for Hasselblad A12 film back Multi color ready
body cap for hasselblad V system. cap for body back use a spring in lighter
Use 9V block battery to drive hasselblad el series. Need two M3 screw and a battery cable to work with. DO NOT USE CHEAP BATTERY. It takes high current to drive film back. Cheap batteries could work with the body itself but will not…
Print settings used: PETG 0.15mm 20% infill supports everywhere
Hasselblad H digital back to Hasselblad V body adapter
SImple framing guide for Hasselblad 500CM cameras with a CFV50c digital back, without the appropriate focus screen.
For World Pinhole Photography Day I printed the original model by @Spotmatic but lacked the specified bottle cap shutter. Instead I designed a simple shutter that could screw on in place of the bottle cap. Hardware required 2x M3*6 Bolts…
Exactly the same size as original ones. Can work with orignal parts Print with MJF or SLS need a M2*12 GB119 PIN and a Ultra thin spacer. You can cut a toothstick and a piece of film instead. Category: Camera
use standalone focuing screen (max size 58x58mm). Recommand using CFML hasselblad focuing screen
Konnte keine passende Schachtel für die 35 x 56 mm Maske für die Hasselblad V-Serie finden, also hab ich eine gemacht. Innenabmessungen: 60 x 60 mm, 3 mm Höhe. Gedruckt mit PLA mit 0,1 mm Schichthöhe wegen der feinen Nasen die in die Nut…
It's a viewfinder mask for taking photos both in 645 and 35mm (56x24mm). The print drops on top of the focusing screen. The 35mm mask does not include the edge of the sprocket holes on either side since I found that to be masking too much…
I have a Phase One P45+ digital back for my Hasselblad 500c/m, but these backs aren't the standard 1:1 ratio that Hasselblad is known for, and mine didn't come with a mask for the finder, so I did a bunch of research and a bunch of…
This is an adapter for early Hasselblad Cameras such as the Supreme Wide Angle and the 1000F & 1600F to adapt the large open cable release socket to be able to use a standard tapered thread cable release.
Two versions of an adapter between the Hasselblad V series rail and a Keks KM-02 light meter. The meter is either centered on the rail, or moved up on the body of the camera depending on personal preference. Uses the M2x4 screws that come…
Improved Hasselblad panoramic mask.
I have a Phase One P45+ digital back for my Hasselblad 500c/m, but these backs aren't the standard 1:1 ratio that Hasselblad is known for, and mine didn't come with a mask for the finder, so I did a bunch of research and a bunch of…
Wanted a dark slide holder to my A and C mag for Hasselblad. Printed some available but the slot was hard to get nice therefore i designed one in two pieces. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No…
This is a body cap pinhole for the XPan/TX1. In order to build it you will need: Main Body Retaining ring 3x M2x6 bolts 3x M2 nuts 0.3mm Pinhole The nuts and bolts should be easy to find in any hardware store or online. I am using a laser…
For the life of me I could not find a “soft shutter button/cap” that fits the 500 series cameras with the larger holes, so I made my own! This insert you can just screw in and it will hold very tight. I recommend to print it out of TPU,…
I have a Phase One P45+ digital back for my Hasselblad 500c/m, but these backs aren't the standard 1:1 ratio that Hasselblad is known for, and mine didn't come with a mask for the finder, so I did a bunch of research and a bunch of…
Hello everyone, I have vectorised a technical drawing of the Hasselblad Data Camera used on Apollo Mission and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes!…
This design does not have a spinning paddle like the original. It's just a round section which works just fine. Suggested print orientation shown in photo. The main part is printed standing on a side edge (you'll need supports). This…
Aufbewahrungsbox für 1, 2 oder 3 Hasselblad Magazine der V-Serie. Die Magazine passen in beiden Richtungen, mit oder ohne Schieberhalter. Es empfiehlt sich die Innenwände mit DC-fix Velour oder ähnlichem auszukleiden. ………………………………………………
Used to house the Rick Oleson bright screen in the Hasselblad V system
This is the first model (of three) that I designed for an alternative to Hasselblad's ORM spirit level. I like the design being a tapered semi-circle, and it fits nicely on the various camera model's accessory bar, just like the OEM…
Maske für die Hasselblad V-Serie, zu platzieren über der Sucherscheibe. Die Maske hat den Ausschnitt 42 x 56 mm. Gedruckt in PLA mit 100 % Füllung damit die Maske halbwegs lichtdicht ist. Schachtel dazu:…
Gegenlichtblende für die Hasselblad SWC mit M 67 x 0,75 mm Gewinde. Eine Version mit M 86 x 1 mm Gewinde für Filter oder Objektivdeckel und eine Version ohne M 86 x 1 mm Gewinde. Ebenso, auf Anregung, Versionen mit Löchern bzw Schlitzen…
Ode to film photography: Too costly to click and too treasured to sell. Now you'll live out your days on a a bookcase shelf. That heavy glass can hold books in place while it sits there looking pretty. Print with a Hasselblad rear lens…
This is a simple cover for a Hasselblad prism, as this one didn't have one. Good slide-on fit and relatively quick to print . I printed this one in PLA with supports for the tiny overhangs just to make sure they didn't sag. These are a…
This is the third model (of three) that I designed for an alternative to Hasselblad's ORM spirit level. This version is a little bit of a departure from the others, with a more angular look that I think suits the camera well. Like the…
Maske für die Hasselblad V-Serie, zu platzieren über der Sucherscheibe. Die Maske hat den Ausschnitt 42 x 56 mm. Die abgedeckte Fläche oberhalb und unterhalb des Formates sind durchbrochen um einen besseren Überblick über das gesamte…
The original design of the Hasselblad projection back can be connected to a Bowen mount video light as a light source. By utilizing the focusing effect of the Hasselblad focusing screen, a low-cost homemade projector can be achieved. If a…
This attachment makes it easy to attach and remove the camera quickly from the Hasselblad tripod quick coupling H mounted on top of tripod. You only need camera 14" screw. My design is compatible with screw that was made by…
The all metal rear lens caps on Hasselblad X-series lenses are nice, but they are heavy and they can scratch other gear when in a bag. Alternatives are expensive. Thus I created this. I designed this to have minimal supports. If you print…
Made this to connect PeakDesign Anchors to my camera. Keeps the camera free from scratches and dampens the rattling of the keyring against the Camera body. I lasercut them from an old wallet, might also work to print them in TPU. I have…
An easier way to remove the front and rear lens assemble from a Hasselblad 500c Carl Zeiss Planar 80mm lens. Spanner wrenches did not work well in my case, so I create this tool to help loosen the front and rear lens assemble. You will…
Verschraubbare Dose für diese kleinen Filter welche am 30mm Zeiss F-Distagon für die Hasselblad rückseitig montiert werden. Gedruckt mit PLA ohne besondere Einstellungen. ……………………. Screw-on container for these small filters which are…
Schlüssel für den Batteriedeckel der motorisierten Hasselblad EL Kameras. Einer mit Stärke 2 mm und einer mit Stärke 1,9 mm. …………………….. Key for the battery cover of the motorized Hasselblad EL cameras. One with a thickness of 2 mm and one…
This is an attachment for the Hasselblad A12 film back to hold the dark slide while shooting. This is a remix of the model from JayMoney, who also did a remix from the original version posted by tillari on thingiverse.com. Print…
I wanted a custom L bracket for my Hasselblad X2D and couldn't find what I wanted on the market. I didn't want to use a cage to make the camera heavier and bulkier, and didn't want a full bottom plate, just something light-weight that is…
This is a plate for the 907X. it has an anti-twist pin and uses a 3/4" 1/4"-20 flathead machine screw. I have printed it in PLA and PETG using default print settings on 2 different Bambu printers.
Objektivdeckel für die Hasselblad SWC mit M 67 x 0,75 mm Gewinde. Oder für Objektive mit M 67 x 0,75 mm Gewinde. Es empfiehlt sich, zumindest den Teil mit dem Gewinde mit der niedrigst möglichen Layerhöhe zu drucken. ………………….. Lens cap…
Three rings to fit around the aperture, focus, and film dials on a Hasselblad film camera. The rings make spinning the dials easier. Print in PETG.
Since the camera lenses in the Photographer Kit housing are unprotected, I created this cover. A lens protector glass is out of the question for me, as it distorts the photos too much. There are two versions of the cover, depending on…
Ablageschale für Zeiss Hasselblad 60mm Weitwinkel Objektiv Distagon. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ………………………….. Storage tray for Zeiss Hasselblad 60mm wide angle…
Aufbewahrungsdose für die Zwischenringe der Hasselblad V-Serie. Die Innere Höhe der Dosen beträgt 34 mm, 45 mm und 68 mm, der Innendurchmesser beträgt 90 mm. Es empfiehlt sich die Innenwände mit DC-fix Velour oder ähnlichem auszukleiden.…
Maske für die alten Sucher der Hasselblad SWC SWC/M für das Format 4,5 x 6 cm (42 x 56 mm) zum aufstecken. Dazu eine kleine Dose für die Aufbewahrung. Es empfiehlt sich, die Maske mit PETG zu drucken da es etwas flexibler als PLA ist.…
This is a version of my nodal plate for the Hasselblad X2D that includes a custom made arcaswiss clamp instead of a bought one. Please check out the other model for more information on usage and printing, and supports: There are other 3D…
Ablageschale für Zeiss Hasselblad 80mm Planar Objektiv. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ………………………….. Storage tray for Zeiss Hasselblad 80mm Planar lens. The tray is 1…
Aufbewahrungsbox für den PM90 Hasselblad Sucher der V-Serie. Es empfiehlt sich die Innenwände mit DC-fix Velour oder ähnlichem auszukleiden. …………………….. Storage box for the PM90 Hasselblad V-series viewfinder. It is recommended to line the…
Have wanted to try smaller format images for a while, so made this conversion for the Hasselblad Polaroid 100 back as I already have a Hassie. I would have liked to make a fully 3D printed holder, but was not confident in how plastic…
Ablageschale für Zeiss Hasselblad 30mm Fischauge. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. …………………. Storage tray for Zeiss Hasselblad 30mm fisheye. The tray is 1 to 2 mm…
Ablageschale für Zeiss Hasselblad 120mm Makro-Planar Objektiv. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ………………………….. Storage tray for Zeiss Hasselblad 120mm Makro-Planar lens.…
Aufbewahrungsbox für den einfachen 45° Hasselblad Sucher ohne Belichtungsmesser der V-Serie. Es empfiehlt sich die Innenwände mit DC-fix Velour oder ähnlichem auszukleiden. …………………………….. Storage box for the simple 45° Hasselblad V-series…
Aufbewahrungsbox für den Hasselblad Lupensucher der V-Serie. Es empfiehlt sich die Innenwände mit DC-fix Velour oder ähnlichem auszukleiden. …………………….. Storage box for the Hasselblad Magnifying Hood V-series viewfinder. It is recommended…
Cover for PC sync/accessory ports on Hasselblad H1/H2/H3D/H4D/H4X/H5D/H5X/H6D series medium format SLR camera bodies. Part # 53349.
![Hasselblad V Mount MALE [STEP]](https://media.printables.com/media/prints/1031538/images/7827143_3778fd5a-4237-4296-be88-244501612bba_492f7977-aee8-48fd-9e95-7866399fed1b/qqpin-yin-jie-tu-20241007110427.png)
![Hasselblad H Mount Male [STEP]](https://media.printables.com/media/prints/1031544/images/7827163_06f99dee-7996-42e0-9d81-48d46bc51bec_cce0d304-9608-4171-960e-b66034c2c629/qqpin-yin-jie-tu-20241007112542.png)
