1 / 3
Hasselblad A12 Winder Lever
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement winder lever for an A12 Hasselblad back
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This design does not have a spinning paddle like the original. It's just a round section which works just fine.
Suggested print orientation shown in photo. The main part is printed standing on a side edge (you'll need supports). This keeps the layer lines perpendicular to the main pin hole. The barrel should can be printed on end to get the truest inner and outer perimeters.
Printed in PETG @ 100% infill.
You will likely need a precision drillbit to ream out the main hole for the pin.