Counting matching models…
Originally published here: Samsung Galaxy A02 & A12 & F12 & M02 & M12 case by tato_713 - Thingiverse This case was designed for the phone Samsun Galaxy A12, but by its size, shape and button places, its compatible with the A02, A04e, A12…
I adapted the Elegoo Centauri Carbon Printhead Fan cover (credit: magedark) to utilize the High-Efficiency fan grille STL developed by Noctua (credit: Noctua_at). I'm not sure about any actual efficiency gains from this fan, but according…
I have made some Profiles for myself to Print these Nylons and wanted to share these for others to use. These are for the P1S but they probably work for the X1C aswell, i am using Orca Slicer and the 0.4mm Nozzle.
I recently attended bike tech workshops through the Professional Bike Mechanics Association (PBMA) where I received training in a whole bunch of different things from many different brands. I was constantly thinking "I bet I can 3D print…
A minimalist, form-fitting smartphone case designed to protect without adding bulk. Features precision cutouts for easy access to all buttons and ports, and a textured grip pattern on the sides for enhanced handling. Perfect for users who…
Phone Case A case for Samsung Galaxy A12/M12. If you want to print it in TPU I recommend the V1 because you don't have to use supports to print it, the V2 is prettier but I wouldn't print it in flexible materials since the supports are…
Remixed model https://www.thingiverse.com/thing:4636076 and https://www.thingiverse.com/thing:2007996 printed in 2 pieces and glued in correct position after wiring contacts. Buy me a coffee: https://ko-fi.com/jokereuc
Doesn't include electrical tracing, and some of the internal gear details but is dimensionally accurate so a good reference to work with for modeling.
Bottom is flat. Case is tested. Best printed slowly in TPU.
Brackets for mounting Noctua NF-A12x15 fan above PSU in Fractal Design Terra case. One is mounted on top of the PSU, the other one is mounted on the case from the front panel side. Works with all Terra's inner bracket positions. Must be…
Water tank cap for W639 that is ideally printed in TPU. Inner most diameter is 74mm. That is the exact size of the original part. Print advise: The fit is a tad loose when using TPU. You might want to print at 98% size in the slicer. (As…
Fan duct to redirect the hot air from inside the case to the outside and prevent a hot pocket between the fans and the top of the case. Based on the FormD T1 1.1 - 120mm Noctua NF-F12 PWM Fan Duct but completly rebuild and adjusted for…
This spacer is designed to maximize airflow with minimal noise impact, almost no added noise compared to running the fan unrestricted. I recommend using at least the 20mm version to ensure enough clearance for optimal airflow. 120mm: •…
This is my best fan design, to date. Recommend 0.15mm layers or smaller, any filament, should print without support but might need a brim. The tail might improve flow ~10%, the intake only about ~2%. Graph shows a rough system curve for…
Model of the Noctua A12x25 Model for folk wanting to enter the Major Hardware Fan Show Down. STL, STEP and F3D files are included.
A scaled up version of the Noctua NV-AA1-12 Airflow Amplifier with mounts to work as a desk fan. The legs can also be modified as needed to attach to a wall etc. There are 2 versions of the legs which pivot off the main body, and are…
For remove Suntour fork top cap. Three size (28, 29, 30 mm) available in a foldable form. The last one (30MM) is usable with a ½" torque wrench. ---------------------------------------------------------------------- Easy to assembly!
FDM friendly version of the Mercedes hood emblem, optimized for 0.4mm nozzles. Will give even better results when printed using 0.2 or 0.25mm nozzle and 0.1mm layer height In three versions: Fully blank emblem plate and insert in one…
The TA12 is a light troop carrier. It can move infantry into or out of a battle zone. Here it comes in five versions for you to play with. Four is wrecks and the fifth is intact. The photos are for earlier versions. Check the blue…
These covers can be used to make the beige Noctua-AF12x25 fans blend better into a custom pc build. There are versions for a single fan a full cover for radiators using 120 mm fans - the design is modular a front cover for radiators using…
Leave a comment if you'd like another file type for this model.
Model Protector lga 1200 socket, if the factory one is lost. Required for delivery. Print settings: - Material: PLA - infill: 15% - Perimeters: 3 - Nozzle: 0.4 - Layer heigt: 0.2 If there is a size problem, use the Slace function. - If…
Display Stand for the Commodore Amiga 1200 Two versions one puts the Amiga in a more vertical position
A wall mount for the BOSCH 12V Max BAT414/GBA12V30 battery (https://www.amazon.com/Bosch-12V-Lithium-Ion-Battery-GBA12V30/dp/B079NWHSCS ). I've also designed a Slat Wall plate for this mount:…
Modeled after 70 rpm 6V Version from Amazon, probably the same dimensions as many others. Gearbox only modeled as a mockup.
The TA-12 is now divided into parts. Each part will be quicker to print and does not need a big print bed. Also, it has seats for your troops and the hatch can be opened. https://www.myminifactory.com/users/terrain4print?show=store Access…
The included mount was too bulky and couldn't be aligned properly. So, I created a low profile version that fit perfect. Fits a VW Golf Mk7 Wagon mounted to the trim panel above the rear window.
This cover is located on the top edge of the tailgate door trim on Mercedes-Benz W124 estate/wagon/kombi models. The plastic gets brittle with age and the latches brake off. I've printed mine from PETG to allow the part to flex a little.…
PC Intake turbo compresor alternative turbine for Noctua A12x25 made for MajorHardvare's fan competition, the exhaust pipes are for better spreed of air in test radiator, they are not intended to use in pc only the turbine and front cover…
Zum Finden der richtigen Position meiner Ra12-Zeichen hilft diese Bohrschablone. Sie funktioniert mit “normalen” Spur N Modellbahngleisen (z.B. Minitrix) und durch die drehbaren Flügel ist sie unabhängig vom Weichenwinkel oder dem…
Fan mount for a 120mm fan above the psu/graphics card.
Viofo A129 Front Camera Mount. Prints on the backside with supports very easy to remove.
Rubber feet for Macbook Pro A1278, may also fit other models. Check dimensions before printing. Designed to be glued to the bottom cover. My settings for Renkforce RF100: 0.1 mm layer height Raft Printed 4 at once to avoid warping and…
Awesomatix A12X Fan holder. Perfekt sit with IP 8800 Lipo
All in all, I loved this light and portable set up. Great inspiration + starting point from @Spotmatic. It is a night and day difference compare to my Hasselblad 500cm + 60mm distagon. With a bit of practice, the 65mm Mamiya sekor is an…
The rear clips on the Amiga 600 and 1200's are prone to breaking if you look at them funny, never mind take it apart every week to install a new accelerator, or gotek, memory upgrade etc. This part fits in between the existing clip lugs…
BROWSE ENCODER KNOB for Pioneer CDJ 900, 2000 Nexus and Nexus 2
Jonsbo N6 Nas Case Front Fan Mount For 120x15 Fan 25 Percent Infill, ( Tested with 15 and it was still plenty strong ) Needed Parts 4 m3x12 Bolts 4 m3 Nuts 2 Magnets And Screws From Old Front Plate 2 120mm by 15mm Thick Fans 8 Course…
This is a darkslide holder that adheres to the back of an A12 film holder with adhesive (glue, tape, velcro, etc.). Since it is designed to fit over the existing film box end tab holder I included a new one on the back of the holder. In…
This is an adapter to mount a noctua 120mm fan (each version should, e.g. for me NF-A12x25 fan) to a minisforum um 790 pro. This allows for super silent operation. For the assembly first unplug the power supply on your minisforum. Then…
Gridfinity insert for the Parkside PBSA 12 screwdriver with battery. Additional fur insert.
My duct had all of its pins/clamps/whatever missing and didn't want to pay 70 Euro for an aftermarket replacement, so I reproduced the design. I have no clue how the original part was clipping into the heat wall, so I made it the way you…
I was thinking of a secure and safe way to store batteries in my range bag for optics, flashlights, etc., and came up with this design. It holds four 2032s, four 1632s, and one 123 battery. The inner racks keep the flat batteries from…
Print with 100% infill. Enjoy👍
A Gridfinity holder for Hasselblad A12 film back Multi color ready
ZA12-C wireless mod with delux m800 ultra internals using original top shell. You only need to prepare ZA12-C, delux m800 ultra, and this parts. You have to trim the topshell and cut two side button's pin of the m800s side PCB.
Modified to add a cutout for the sim tray. :)
This model is based on eedev's fan frame with the pogo pins on the side. In my case i didn't need the cutouts for the pogo pins as I was using the original cables and it was harder to print with supports in PETG. So I removed the cutouts,…
Well, the title is quite self explanatory. PLA is fine, I printed mine in PLA silk for that extra look.
I bought a Goex + OLED display from Centuriontech. Like everything I have received from there it is excellent but the filament used to print the housing for the OLED was not a great match for my case. I have a good opaque white PLA that…
UPDATE 11/11/2023: Added rotated version of Pi, Emu68 and Amiga logo UPDATE 20/10/2023: Confirmed OK on A600, Added Pi and Emu68 logo A case for the MicroSD/SD Memory Card Slot to TF Card Extender Cable Extension. Created for the Amiga…
General This is a replacement for the clutch slave cylinder flange gasket used on manual gearboxes of the Mercedes-Benz W124. The Mercedes-Benz part number is A1242950087/1242950087. You can also find a .dxf file you could potentially use…
This is a rear trapdoor and a holder frame for the HDMI output of the Individual Computers Indivision AGA MK3 on an Amiga 1200. The design is specially made for A1200.net replica cases, and may not work for classic Amiga 1200 cases. It…
This is a mounting case for OLED and Rotary dial for Gotek Running Flash Floppy firmware. Can be used for Amiga 1200 with gotek or other retro computers
Remix of dvoelkel's v4 design on Thingiverse (https://www.thingiverse.com/thing:1887963) to add space for a ACA1221ec heatsink. Printed at 0.3mm layer height in ABS with supports. Used textured steel sheet for nicer surface finish (see…
Viofo CPL A119 A129 Polarisation filter holder If You broke your CPL filter holder you can print one.
Mounts the S.M.S.L dac+amp under a desk. Body mount needs to be mirrored and printed twice for left and right. One screw per side. Bracket included for the power brick, two screws.
This is a model of the A12 spyplane from Lockheed. This model is remixed from https://www.thingiverse.com/thing:35383 Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: Doesn't Matter Supports: Doesn't Matter Category: Vehicles
Double version of the NA-IS1-12 Spacer to fit 2 120mm fans side by side. Additionally I modified the inner radius of the spacer to better fit the NF-A12x25 fan. In the picture you can see the size difference compared to the original part.
This is another Mac Pro to PC conversion. But the outside looks basicly the same as the stock Mac Pro and i made all of the ports work. Ports The original io won't be needed. Glue extension cables to the empty holes. Note that the front…
This module is designed to fit into the rear of the A1200.net case and houses a SD card socket, a HDMI extension and optionally the DB9 mouse connector. A 1D4 revision will often have this as a single socket on a short cable unless you…
Modification of original by rounding corners (better for shrink-wrapping) and adjusted the cell radius and length to work for the much larger 32113 cell size made by A123 for automotive applications. Pack is for 8 cells. If wired in…
This design does not have a spinning paddle like the original. It's just a round section which works just fine. Suggested print orientation shown in photo. The main part is printed standing on a side edge (you'll need supports). This…
Since I didn't want to drill holes in the beautiful case from A1200.net , I designed a small panel that fits directly into the expansion opening of the case. I use several switchable extensions and an RGB2HDMI mod in the Amiga. Holes…
This is a custom rear intake duct system for the Lian Li A3 case and Thermalright PA120. It is recommended to take the fans off the CPU cooler and removing the GPU before mounting the duct into the system. If you have the time, let the…
Designed to increase surface area like an old biplane, each blade has an overall “airplane style wing” but relieved and angled to possibly “compress” air vertices to orient correctly and exhaust them while and scavenging low pressure…
This is a remixed and adjusted version of the HDM mod , specially tuned for PA12-CF printing . Dimensions were tweaked to compensate for PA12 shrinkage , ensuring a solid and precise assembly once printed. 🔧 What's new: Dimensional tweaks…
The end goal is to make the following fans as coaster for this set A20 A15 A14 A12 A12R A12_G2 A12R_G2 F12 (and maybe some other) Filament used : Elegoo rapid PETG beige Sunlu PETG chocolate The beige is really close to the right color…
This items will hold the Anker PowerCore Essential 20000 (Model A1268). I have other models for different USB power banks in the works as well. You will need two M2.5 Skadis T-Nuts by @6d6178 and two M2.5 DIN912 screws for mounting the…
This is a custom designed clamp-on handle for Dewalt right angle adapter DWARA120 and DWARA60. This right angle adapter can be difficult to hold and maintain the drill or driver alignment due to the torque applied by the drill or impact…
Simple 2d design of the aa12.I will make more guns if you want to suggest them let me know in the comments
Lomo 38mm lens(from LCA120&instant glass) to No.0 shutter conversion
one-piece cover I print the cover from TPU 95A. Putting on the adapter is best when the cover is still warm, I put it on with the USB connector facing forward. It takes a bit of force. two-part cover I print the two-piece cap from PLA.…
Need: 4x M3x10 for spacers. 2x M3x5 or M3x6 for block off plate. This is a mod to install a Noctua A12x15 fan on top of a Louqe Raw S1, while still using the stock top plate. This moves the top plate off the fan, but keeps a low profile…
Additional notes: The brackets can be attached to the wall using double sided tape. Both brackets include an Ethernet cable guide on the back.
5mm inner hole, 6mm length, 38teeth, 12 pressure angle, module 1.0 Hope this will help. Printed using PA12 by me. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other…
Holder for A1200 KeyCaps. Each KeyCap has its own compartment and a square connector to mount onto. The connector has a through hole for easy removal of the KeyCap. Case has a lid which simply slides snuggly onto the base. Requires a…
HP/Poly/Plantronics CA12CD / CA22CD Base Retainer Clips - Push in retainer clips that hold in the remote or battery. Models for the CA12CD and new CA22CD. These often break in 24/7 environments and as far as I know they don't make…
This is my submission for the Fan Showdown on Major Hardware's channel. Supports touching buildplate only. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: .2 or less Infill: 5 Filament: any PLA any…
I modified the back trap door with slots for 1xMicroHDMI, RJ45 network.and a slot to keep the microsd case in place. The Micro HDMI connector socket is designed to hold the Micro HDMI Type D Female FPC Connector Socket with a flat cable.…
Modified back trap door with RJ45 and Micro HDMI slots. Used on Amiga 1200 with a Vampire 1200 accelerator. Get some flat ribbon cable for the network module, and remove the top on one end or else you will be touching the floppy drive.…
Modified back trap door with slots for MicroHDMI/HDMI and RJ45. Also made an opening for pulling a microsd extension out of the computer (Micro SD Memory Card Slot to TF Card Extender Cable Extension) If you use the HDMI version, you must…
szybki prosty w wydruku pojemnik na zakrętarkę parkside pasuje do Organizer QBRICK System ONE M Plus 2.0
This is an interface plate to put your XPA125B on top of your Icom IC-705 if you already have a Windcamp protective shield . a stand in the back of the xpa125 will hold it in the same angle as the 705. There is also a little enclosure…
This mount will hold the attachment horizontally with the heavy head resting in a cradle that should prevent it from falling out. As you know these things re very heavy on one end.
This items will hold the Anker PowerCore 10000 (Model A1246). I have other models for different USB power banks in the works as well. Right now I also have this holder for the PowerCore Essentials 20k You will need two M2.5 Skadis T-Nuts…
In my A1200 I have a PIStorm32-lite with CM4. I find it convenient to be able to eject the microSD for backups. In developing the trapdoor I am using it went through three stages: plain (to get the dimensions and latch right), for…
Amiga 1200 Gotek Cover to add Rotary Encoder to A1200.NET case A1200.NET cases have cut-outs for adding an LCD screen to the case when using a Gotek. This simple print expands the top cut-out (in the grills) so you can add a rotary…
A spacer for Noctua NF-A12x25 G2 and NF-A14x25 G2 fans designed to reduce the noise when mounted on meshes and grids. In those cases, additonal noise is created by the fan blades passing close to the grid or mesh. This especially affects…
The access points from Plasma Cloud come with a variety of wall and ceiling mounts which can be clipped on easily. But there was not one a single one which can be used as desk mount. But the orientation can be rather important on these…
Prototype version, fits the Sapphire R9 290X Tri-X OC with two Noctua NF-A12X15. I tried this setup out to reduce noise and improve temps, but the temps increased with 4 degrees Celsius, making the top GPU 94 degrees. Noise was reduced. I…
Wandhalterung für meinen Bosch 12 V GSA Fuchsschwanz
Mount layout for voltage converter model EA120-12v I purchased on amazon. OpenScad file for rough model of the converter for design purposes included.
Printing Material : SINTRATEC PA12 High Performance Polymer Powder The industrial-grade polyamide powder produces strong and durable parts that are ideally suited for prototypes as well as end-use applications.
Modified the Front Rod holders to add a cutout so that it will be easier to align the Y axis Rods. The current design has a hole in the front brackets that you must insert the rods into. This puts inward pressure on the rods making them…
Hello guys, again with another fun project replacing my old Viofo A129 Pro Duo dashcam body that has been sitting in the sun for an extended period, and is starting to become brittle and break apart. Since I didn't find any printable…
This is a 3D-printable replacement for the rubber-style bottom feet used on the classic aluminum MacBook and MacBook Pro Unibody models. I designed the part using a 2011 13-inch MacBook Pro A1278 as the reference and tried to reproduce…
While I'm sure it was fine, the idea of metal on glass made me uncomfortable, especially under a clamping load. I also noticed there's potential for water to find its way out of the tank via capillary action and I wanted to prevent that…
An air deflector to help direct air upwards in my sff case and away from my psu intake, on a dual fan NH-D12L set up it mounts to the second a12x25r which has 83x93mm hole spacing, pretty niche use case where the CPU cooler air direction…
