Amiga A600/A1200 rear case clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reinforcement or replacement for the easily broken rear clips on A600/A1200
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 103
- Makes
- 0
- Views
- 554
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The rear clips on the Amiga 600 and 1200's are prone to breaking if you look at them funny, never mind take it apart every week to install a new accelerator, or gotek, memory upgrade etc.
This part fits in between the existing clip lugs so can either replace the snapped one, or preserve and strengthen existing ones.
Print in ABS to allow it to be acetone welded in place. Of course printing in ABS may suffer from elephants foot, so make sure to clean the print up with a needle file afterwards to ensure perfect fit (especially for one behind the disk drive, a little extra needs to be removed from the back of the clip to fit. See middle one in the picture of a modified one)