Shutter for @Spotmatic 's Hasselblad Film Magazine Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since I didn't have access to the specific bottle cap specified in the original design, I made a simple shutter instead
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 63
- Makes
- 1
- Views
- 1,096
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
For World Pinhole Photography Day I printed the original model by @Spotmatic but lacked the specified bottle cap shutter. Instead I designed a simple shutter that could screw on in place of the bottle cap.
Hardware required
- 2x M3*6 Bolts
- 2x M3 Nuts
Note that only the shutter is included in this page, for the camera body please check out the original page;
https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt/
I've included some sample images that from the first outing of the camera. I over exposed most of them and there are some light leaks and funky development issues that all add to the charm. Enjoy!
