1 / 5
Shutter for @Spotmatic 's Hasselblad Film Magazine Mount — zdjęcie 1
1 / 5

Shutter for @Spotmatic 's Hasselblad Film Magazine Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Since I didn't have access to the specific bottle cap specified in the original design, I made a simple shutter instead

Ocena
0 / 5
Polubienia
10
Pobrania
62
Wydruki
1
Wyświetlenia
1089
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

For World Pinhole Photography Day I printed the original model by @Spotmatic but lacked the specified bottle cap shutter. Instead I designed a simple shutter that could screw on in place of the bottle cap.

Hardware required

  • 2x M3*6 Bolts
  • 2x M3 Nuts

Note that only the shutter is included in this page, for the camera body please check out the original page;

https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt/

I've included some sample images that from the first outing of the camera. I over exposed most of them and there are some light leaks and funky development issues that all add to the charm. Enjoy!