1 / 1
Hasselblad V series adapter for Keks KM-02
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter mounts for the Hasselblad V series rail to the back of a Keks KM-02 light meter. Two versions.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 51
- Makes
- 3
- Views
- 495
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two versions of an adapter between the Hasselblad V series rail and a Keks KM-02 light meter. The meter is either centered on the rail, or moved up on the body of the camera depending on personal preference. Uses the M2x4 screws that come with the Keks KM-02.
I've had most success when printing the model vertically (Hasselblad rail is oriented “vertically” on the print bed) and the cutout for the USB-C charging adapter at the top.
PLA prints tested so far, assume PETG would work fine as well.