1 / 1
Hasselblad V series adapter for Keks KM-02 — zdjęcie 1

Hasselblad V series adapter for Keks KM-02

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter mounts for the Hasselblad V series rail to the back of a Keks KM-02 light meter. Two versions.

Ocena
5 / 5
Polubienia
6
Pobrania
51
Wydruki
3
Wyświetlenia
495
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Two versions of an adapter between the Hasselblad V series rail and a Keks KM-02 light meter.  The meter is either centered on the rail, or moved up on the body of the camera depending on personal preference.  Uses the M2x4 screws that come with the Keks KM-02.

I've had most success when printing the model vertically (Hasselblad rail is oriented “vertically” on the print bed) and the cutout for the USB-C charging adapter at the top.  

PLA prints tested so far, assume PETG would work fine as well.

Tagi