BCN3D sigma extruder back cover 1.0 nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BCN3D sigma extruder back cover, for the 1.0mm nozzle thicker cable.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I noticed that the 1.0mm nozzle had a thicker cable that doesn't fit the standard cover, so much in fact that I couldn't fully close it without risking breaking something or at least stripping the screw threads, so I edited the model with a simple boolean operation to accommodate for the ticker cable.
For your reference, the photo with the white cover is the original design (notice it's not screwed), the photo with the one printed in blue is the new remixed design, the CG with the black one is an overlay of both the old and the new design, with the difference shown in red.
Category: 3D Printer Parts