1 / 6
U-Shank Jigsaw Blade Storage — zdjęcie 1
1 / 6

U-Shank Jigsaw Blade Storage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made a set of the boxes by rafalmag before realizing that all my jigsaw blades are U-Shank, not T-Shank. While…

Ocena
0 / 5
Polubienia
6
Pobrania
39
Wydruki
0
Wyświetlenia
419
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I made a set of the boxes by rafalmag before realizing that all my jigsaw blades are U-Shank, not T-Shank. While redrawing the box in Fusion 360 for U-Shank blades, I created a sleeve for each size box since I thought they would be easier to store in the tool box without the bolt.

I have included two sizes, 93mm and 110mm long (tray length) which should accommodate most blade lengths. There is a slight raised area, just like on the original version, that keeps the tray inside the sleeve. It was left a tight fit so you can slightly sand the raised area to adjust the retention to your liking.

Print Settings

Printer:

Railcore II Custom

Rafts:

No

Supports:

No

Resolution:

.20

Infill:

15%

Filament:

Sunlu PLA+

Category: Tool Holders & Boxes

Tagi