U-Shank Jigsaw Blade Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a set of the boxes by rafalmag before realizing that all my jigsaw blades are U-Shank, not T-Shank. While…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 39
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I made a set of the boxes by rafalmag before realizing that all my jigsaw blades are U-Shank, not T-Shank. While redrawing the box in Fusion 360 for U-Shank blades, I created a sleeve for each size box since I thought they would be easier to store in the tool box without the bolt.
I have included two sizes, 93mm and 110mm long (tray length) which should accommodate most blade lengths. There is a slight raised area, just like on the original version, that keeps the tray inside the sleeve. It was left a tight fit so you can slightly sand the raised area to adjust the retention to your liking.
Print Settings
Printer:
Railcore II Custom
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
15%
Filament:
Sunlu PLA+
Category: Tool Holders & Boxes