MK3S+ Endoscope Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a remix of a remix of a USB endoscope camera mount for the MK3S
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 66
- Wydruki
- 2
- Wyświetlenia
- 639
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
I'll have to dig through the models that I found that served as the template for this. I took the STL and modified it to accomodate some different things.
- The USB endoscope camera I used https://www.amazon.com/dp/B07PBF6DX5?psc=1&ref=ppx_yo2ov_dt_b_product_details
- I wanted the screw to tighten the endoscope down to be vertical
- I quasi-mirrored the right fan mount to the left side of the fan (quasi-mirror, as the camera isn't perfectly centered via the heatsink cooling fan
I had to tinker a little, as the first one I made had JUST too much length to the bottom and the PETG would barely scrape against the layer it was on (mainly if there was support material. Adjusted the angle a little.
EDIT: You will need 2 screws to attach the mount. 1x M3x16 screw, replacing the 14mm screw on the left, and 1x M3x22 screw for the right.
This is potentially a work in progress, and if there's any revisions that need to be made after it reprints, I'll upload.