1 / 2
Air tag case for 3/4 in Strap or Dog Collar — zdjęcie 1
1 / 2

Air tag case for 3/4 in Strap or Dog Collar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An air tag case for a standard dog 3/4 in (~19.7mm) strap or dog collar.

Ocena
4,5 / 5
Polubienia
63
Pobrania
300
Wydruki
4
Wyświetlenia
1685
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution

Wanted an air tag case to put on a dog collar that:

  • Securely held the air tag
  • Securely attached to the collar 
  • Has a small, rounded profile that won't be too big on the collar

 

What I came up with was a model that uses 2mm (M2*6) screws to hold the air tag and the collar strap together eliminating concerns about plastic snap together components breaking.  The screw heads are recessed to help keep the top smooth.

 

I printed it w/ PETG and a .6mm nozzle.    I used a .15mm layer height to help w/ smooth profiles, but you can probably get away with larger layers to print faster.   I did increase the number of perimeters to 5 to help solidify the print.

Optionally, for more strength print the bottom of the case on edge, so the printhead makes a U shape when printing.  This reduces depending on layer adhesion to keep the strap attached at the cost of a longer print time.  (Note the photo shows printing flat, not on edge.)

 

You can get a set of small screws online for a under $15 US.  I've found them handy to have around for various models and jobs.

 

Tagi