1 / 2
Air tag case for 3/4 in Strap or Dog Collar — image 1
1 / 2

Air tag case for 3/4 in Strap or Dog Collar

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An air tag case for a standard dog 3/4 in (~19.7mm) strap or dog collar.

Rating
4.5 / 5
Likes
63
Downloads
300
Makes
4
Views
1,685
Reviews
2

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution

Wanted an air tag case to put on a dog collar that:

  • Securely held the air tag
  • Securely attached to the collar 
  • Has a small, rounded profile that won't be too big on the collar

 

What I came up with was a model that uses 2mm (M2*6) screws to hold the air tag and the collar strap together eliminating concerns about plastic snap together components breaking.  The screw heads are recessed to help keep the top smooth.

 

I printed it w/ PETG and a .6mm nozzle.    I used a .15mm layer height to help w/ smooth profiles, but you can probably get away with larger layers to print faster.   I did increase the number of perimeters to 5 to help solidify the print.

Optionally, for more strength print the bottom of the case on edge, so the printhead makes a U shape when printing.  This reduces depending on layer adhesion to keep the strap attached at the cost of a longer print time.  (Note the photo shows printing flat, not on edge.)

 

You can get a set of small screws online for a under $15 US.  I've found them handy to have around for various models and jobs.

 

Tags