Thule Yepp Nexxt maxi wall bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall bracket for storing your Thule Yepp Nexxt maxi child bike seat when not in use.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 642
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
It should also work for Thule RideAlong, but I have not tested it. Center distance between metal bars is 89 mm.
I made two versions, a screw and a bolted version.
Screw version:
Made for a Ø4 mm countersunk screw with a head diameter of Ø7,8-9 mm. If you choose to use this version, I recommend having a deep wood piece behind that the screw goes through or mount into a concrete wall with a suitable plug type for the wall material.
Bolted version:
Made for M6 mm hexagon bolt with a S distance (Width Across Flats) of around 10 mm.
Print instructions:
I used 0,25mm layer high which worked great (I don't think that it is a standard profile, if not, then I recommend using 0,2mm).
25% Infill (Grid worked fine).
4 Perimeters for both Vertical and Horizontal shells.
I recommend PETG, but other material will also work.