Thule Yepp Nexxt maxi wall bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall bracket for storing your Thule Yepp Nexxt maxi child bike seat when not in use.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 1
- Views
- 642
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
It should also work for Thule RideAlong, but I have not tested it. Center distance between metal bars is 89 mm.
I made two versions, a screw and a bolted version.
Screw version:
Made for a Ø4 mm countersunk screw with a head diameter of Ø7,8-9 mm. If you choose to use this version, I recommend having a deep wood piece behind that the screw goes through or mount into a concrete wall with a suitable plug type for the wall material.
Bolted version:
Made for M6 mm hexagon bolt with a S distance (Width Across Flats) of around 10 mm.
Print instructions:
I used 0,25mm layer high which worked great (I don't think that it is a standard profile, if not, then I recommend using 0,2mm).
25% Infill (Grid worked fine).
4 Perimeters for both Vertical and Horizontal shells.
I recommend PETG, but other material will also work.