Snub Dodecahedron Star
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Snub Dodecahedron star which measures about 4 feet wide. The vertices are 6". This star is lit by WS2811…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This is a Snub Dodecahedron star which measures about 4 feet wide. The vertices are 6". This star is lit by WS2811 bullet pixels which I will post the STL for later.
Update 5/8: Added STL for the light mounting discs and a little tool for installing them.
This design was inspired by Chris Faye's awesome LED powered burning man sculpture.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: ZYLTECH PETG Milky White
Notes:
For best results, tune your printer. Slice the files twice - once in normal mode, once in spiralized/vase mode. Stitch the GCODE together starting the spiral mode a few millimeters above each platform. I found increasing the flow to 150% in the spiral section was helpful. This was printed with a 0.8 nozzle.
Category: Sculptures