Anycubic i3 Mega S Trigorilla to SKR 2 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapt your Anycubic i3 Mega Trigorilla board to a Bigtreetech SKR 2 with room for cables and right angle USB
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 168
- Wydruki
- 1
- Wyświetlenia
- 1261
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Even though I re-designed it from scratch, this is pretty much a remix of Michelix's adapter found on Thingiverse https://www.thingiverse.com/thing:3629440
This adapter gives room to run cables underneath as well as add a right angle USB adapter.
To install:
Remove your Trigorilla board (don't forget to label or note your cables first).
Slide the adapter plate over the metal posts. Use the original M3 screws from the Trigorilla board to secure the adapter to the frame.
Use four M4 x 8mm wood screws to install the SKR 2 to the adapter plate. You could potentially use four M3 machine screws instead, but I haven't tested it (the screw hole opening is 2mm in size).
Print Settings:
- Filament: Polymaker Polylite PETG, Teal
- Layer height: 0.2
- Perimeters: 2
- Infill: 25%