1 / 2
horizontal filament spool drybox
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
horizontal filament spool drybox with minimum modification to the container
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 832
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (15)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (18)Powiązane
This is a simple filament drybox that holds a single spool horizontally. The only modification that need to do to a sealed container is to drill a 10mm diameter hole for installing pneumatic connector.
Assembly after print took only about 5min.
Assembly instruction video:
Off-the-shelf parts you need:
| Part name | number |
| Sealed container(about 5.5L or more)* | 1 |
| Desiccant | as many as you like |
| Hygrometer | (optional) |
| 608zz bearing(ID 8mm,OD 22mm, H 7mm) | 1 |
| M8 bolt with 20~25mm length | 1 |
| M8 nut | 1 |
| M8 washer | 1 |
| PC4-M10 pneumatic connector | 1 |
| M10 washer | 1 |
| M10 nut | 1 |
| PTFE tube(ID 2mm, OD 4mm) | distance from your drybox to printer |
Tools you need:
| Tool name | number |
| Drill | 1 |
| 10mm drill bit | 1 |
| Adjustable wrench | 2 |
*The sealed container I used is ASVEL KBOX F-30 5.6L with internal dimension around 285*192*100mm.
Note:
- For spool holder disk, choose the one that fits your M8 bolt. If using a hexagonal head bolt, prefer using “spool holder disk for hexagonal cap M8 bolt”.
- In order to make this design fits to different sizes of container, you may modify the length of spacers.
- To accomodate different spool hole sizes, insert the tapered pin to different holes in spool holder disk.
- All 3d printed parts need no support structure if oriented properly. And all of them are hollowed out to reduce filament usage.
The reason I chose to design horizontal drybox instead of more common vertical drybox:
- Most sealed containers about the size of a spool are shallow in depth. Which only allows spool to be placed horizontally.
- Converting a container that is designed to be used horizontally into vertical, takes effort modifying the side of the container, and sometimes need drilling more holes, which may introduce more moisture leakage.
- There are many horizontal spool holders that are usable. Which means my design isn't too weird.
- Horizontal containers are stackable, whick ends up in smaller footprint. If not stacking too many of them(about 3 or 4), there isn't much difference between picking the top one and picking the bottom one.