1 / 1
Whoop 4.0 Fitness Band Charging Station — zdjęcie 1

Whoop 4.0 Fitness Band Charging Station

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I created a charging station for my Whoop 4.0 fitness band batteries.

Ocena
0 / 5
Polubienia
17
Pobrania
132
Wydruki
0
Wyświetlenia
1422
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial

The Whoop 4.0 fitness strap uses external batteries that are charged with a USB-C cable. However, no dock for the batteries is sold by Whoop. This is my solution.  There are two options available, a single dock and a double dock for households with two Whoop 4.0. 

For a single dock, print out the following files:

whoop_4_single_charging_dock

screw_base_reversed

 

For a double dock, print out the following files:

screw_base_reversed

screw_base_single

whoop_4_double_charging_dock

You will also need to purchase a right-angle USB-C adapter. I used this one from Amazon. 

https://www.amazon.com/gp/product/B08TZY4MSR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

Assembly instruction:

 

Print out the parts, insert the right-angle USB-C adapter in the dock and then screw the base plate onto the dock to hold the adapter in place. I used some small hex screws, but any flat screw will work. Though you can cut the threads or use inserts if you like for the screws, I found that the PLA will hold quite well with the screws self-tapping. 

Then you can plug in an USB-C cable and you are good to charge! Just slide the battery onto the docks and gently push it down on to the USB-C input. It will be snug, but not excessively tight. 

Let the charging begin!

 

 

 

Tagi