Iphone 12/pro Case with hex Design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
iPhone 12 and 12 pro case with a hexagonal tile pattern. It case protects the screen as well as the camera lenses
- Ocena
- 4,833 / 5
- Polubienia
- 63
- Pobrania
- 763
- Wydruki
- 8
- Wyświetlenia
- 1829
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
iPhone 12 and 12 pro case with a hexagonal tile pattern. This case protects the screen as well as the camera lenses in the back!!
Fits securely and with a satisfying snap!
The apple logo looks sick peaking out through the design.
Let me know how you like it!
Print Settings
Layer Height: Any! i.e. 0.12 - 0.28. If you go with 0.28 there will only be one infill layer, keep the infill low for ease of flexibility when installing and uninstalling. if you go with a smaller layer height just make sure to follow my guidance in the infill section below.
Infill: no more than 15%. I went with 10%. If you add too much infill it might be harder to bend while installing and uninstalling it on the phone.
Infill Pattern: this should not matter but again, for ease of installation I would go with something like concentric, lines, or zig-zag. I went concentric
Support: None. no supports needed if printed on its back.
I printed this using Poloymakers Polylite PLA and a few Amolen PLAs to test fit and feel, PLA should be more than good enough though I would suggest printing with a more durable filament like PETG or even HTPLA once annealed if you want added durability.