Iphone 12/pro Case with hex Design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
iPhone 12 and 12 pro case with a hexagonal tile pattern. It case protects the screen as well as the camera lenses
- Rating
- 4.833 / 5
- Likes
- 63
- Downloads
- 763
- Makes
- 8
- Views
- 1,829
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
iPhone 12 and 12 pro case with a hexagonal tile pattern. This case protects the screen as well as the camera lenses in the back!!
Fits securely and with a satisfying snap!
The apple logo looks sick peaking out through the design.
Let me know how you like it!
Print Settings
Layer Height: Any! i.e. 0.12 - 0.28. If you go with 0.28 there will only be one infill layer, keep the infill low for ease of flexibility when installing and uninstalling. if you go with a smaller layer height just make sure to follow my guidance in the infill section below.
Infill: no more than 15%. I went with 10%. If you add too much infill it might be harder to bend while installing and uninstalling it on the phone.
Infill Pattern: this should not matter but again, for ease of installation I would go with something like concentric, lines, or zig-zag. I went concentric
Support: None. no supports needed if printed on its back.
I printed this using Poloymakers Polylite PLA and a few Amolen PLAs to test fit and feel, PLA should be more than good enough though I would suggest printing with a more durable filament like PETG or even HTPLA once annealed if you want added durability.