1 / 7
Yaesu FT-60 spacer for 3rd party antennas
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I finally got tired of the silly gap left under nearly any third party antenna or adapter on the FT-60 (which isn't…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 193
- Wydruki
- 2
- Wyświetlenia
- 844
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (34)Powiązane
I finally got tired of the silly gap left under nearly any third party antenna or adapter on the FT-60 (which isn't flat, so can't be filled with a simple washer) and made a spacer to go on it =] It may fit a FT-50 as well, not certain.
Print Settings
Resolution:
0.2mm
Notes:
I used PETG, but I imagine pretty much anything -- anything at all -- should work. Might be best in flexible filament, we'll have to play with that later.
Category: Hobby