Sump Hose Couplers (1-1/2" & 1-1/4")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are couplers for splicing US sizes of sump pump hoses together. In the hardware store they are less than $2 a…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 750
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
These are couplers for splicing US sizes of sump pump hoses together. In the hardware store they are less than $2 a piece, but i couldn't find any so had to model some up. They are designed to be a tight fit with my hoses so you may need to adjust.
Print Settings
Supports:
No
Notes:
No supports needed. They should load in the correct orientation.
I suggest printing solid or nearly so with a lot of perimeters.Keep your layer height to width ratio low to help with the overhangs on the barbs.
I printed with .8mm perimeters and .2 mm layer heights using a .4mm nozzle. Also had the seam set to random.
Most any common material should work. I used both abs and petg.
Category: Outdoor & Garden