1 / 3
Sump Hose Couplers (1-1/2" & 1-1/4") — image 1
1 / 3

Sump Hose Couplers (1-1/2" & 1-1/4")

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are couplers for splicing US sizes of sump pump hoses together. In the hardware store they are less than $2 a…

Rating
5 / 5
Likes
18
Downloads
152
Makes
1
Views
751
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

These are couplers for splicing US sizes of sump pump hoses together. In the hardware store they are less than $2 a piece, but i couldn't find any so had to model some up. They are designed to be a tight fit with my hoses so you may need to adjust.

Print Settings

Supports:

No


Notes:

No supports needed. They should load in the correct orientation.

I suggest printing solid or nearly so with a lot of perimeters.

Keep your layer height to width ratio low to help with the overhangs on the barbs.

I printed with .8mm perimeters and .2 mm layer heights using a .4mm nozzle. Also had the seam set to random.

Most any common material should work. I used both abs and petg.

Category: Outdoor & Garden

Tags