Case for W3KKC's RA-35 Radio Adapter Interface Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For someone putting up a low cost repeater, the cost of a USB Radio Interface for any type can be steep. That's one…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
For someone putting up a low cost repeater, the cost of a USB Radio Interface for any type can be steep. That's one reason I was thrilled when I found W3KKC's RA-35 -- only problem was, it didn't come with a case. Well, that can be fixed =]
Here are some things to know about this case:
- No hardware required -- put the RA-35 in and snap the lid shut
- There are holes in the lid placed above each of the three LEDs
- No supports are required
I hope you find it useful =]
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Notes:
Make sure you turn the lid upside down so the flat (top) side is down else it won't likely work real well =]
Category: Electronics