1 / 11
Case for W3KKC's RA-35 Radio Adapter Interface Board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For someone putting up a low cost repeater, the cost of a USB Radio Interface for any type can be steep. That's one…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
For someone putting up a low cost repeater, the cost of a USB Radio Interface for any type can be steep. That's one reason I was thrilled when I found W3KKC's RA-35 -- only problem was, it didn't come with a case. Well, that can be fixed =]
Here are some things to know about this case:
- No hardware required -- put the RA-35 in and snap the lid shut
- There are holes in the lid placed above each of the three LEDs
- No supports are required
I hope you find it useful =]
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Notes:
Make sure you turn the lid upside down so the flat (top) side is down else it won't likely work real well =]
Category: Electronics