Screw measuring tool, imperial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to measure Imperial or English screws and bolts.
- Ocena
- 5 / 5
- Polubienia
- 235
- Pobrania
- 1688
- Wydruki
- 36
- Wyświetlenia
- 6750
- Oceny
- 33
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Based on the metric versions developed by users Boogie and Sneaks, this version is meant to help measure and sort Imperial fasteners, from #2 up to ½" in diameter and up to 6 inches long. It was designed in Onshape.
Printing Instructions
- 0.2mm layer height
- No supports
- Gyroid infill @ 15%
- PETG
For the non-embedded version, you can add a color change at layer height 13.00mm and print the raised letters in a different color. I used my MMU2S and added a color change at the 13.00 mm layer. If you use the MMU2 gcode file, the body is allocated to filament #2, and the letters filament #1. For the embedded version, the letters are embossed into the part (flush upper surface), so I used my MMU2S to do the color changing. There are three tool changes for this version.
Changing Colors with PrusaSlicer