Screw measuring tool, imperial
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool to measure Imperial or English screws and bolts.
- Rating
- 5 / 5
- Likes
- 235
- Downloads
- 1,688
- Makes
- 36
- Views
- 6,750
- Reviews
- 33
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Based on the metric versions developed by users Boogie and Sneaks, this version is meant to help measure and sort Imperial fasteners, from #2 up to ½" in diameter and up to 6 inches long. It was designed in Onshape.
Printing Instructions
- 0.2mm layer height
- No supports
- Gyroid infill @ 15%
- PETG
For the non-embedded version, you can add a color change at layer height 13.00mm and print the raised letters in a different color. I used my MMU2S and added a color change at the 13.00 mm layer. If you use the MMU2 gcode file, the body is allocated to filament #2, and the letters filament #1. For the embedded version, the letters are embossed into the part (flush upper surface), so I used my MMU2S to do the color changing. There are three tool changes for this version.
Changing Colors with PrusaSlicer