Airbender duct for Artillery Sidewinder/Genius
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I use a different heatblock with my Sidewinder, the one compatible with the PT100 Thermistor. For this reason, most…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 524
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I use a different heatblock with my Sidewinder, the one compatible with the PT100 Thermistor. For this reason, most fan ducts were either too bulky for my setup or cooling the nozzle and heatblock more than the part.
A few weeks and 12 iterations later, I present you the "Airbender" part cooling duct. It fits press fit if your fan isn't worn out, otherwise use a drop of your favorite superglue.
After installing, turn the fan on and hold your fingertip just below the nozzle and feel the breeze. This duct won't win any awards for its aesthetics, but it saves room, weight and works really well. In fact, it works so well, I was blown away by the amount of air. Sorry.
The one in the picture is resin printed, but I printed it in FDM too, and it worked fine.
The screenshots show the orientation in the slicer.
I've had this printer for two years now and cooling was always a problem. I'm happy to report it isn't anymore.
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
doesn't matter doesn't matter
doesn't matter
Notes:
The finer the layer height, the easier overhangs print.
You can pop out the bit of support easily with pliers or something similar.
Coffee
If you find this thing useful and want to fuel my caffeine addiction, feel free to go ahead.
₿itcoin address:
bc1qpjntxunn7djgeqlw6stmqalk2kxyxd0fk9h72j
Category: 3D Printer Parts