DC 775 Turbine - ! WITH STEP File !
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One of those things you do when you're bored.
- Ocena
- 5 / 5
- Polubienia
- 117
- Pobrania
- 972
- Wydruki
- 4
- Wyświetlenia
- 3834
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
One of those things you do when you're bored. Just for fun :)
Physically definitely not correct, but still makes a lot of air at the exit.
Needed parts:
- 4x M3 min. 20mm / max. 25mm long - Socket Head Screws
- 2x M4 x 8mm - Countersunk Head Screws
- 1x DC 775 Motor + power supply of your choice.
(Optional):
At the bottom i made a bunch of holes for different screws if you like to mount it somewhere.
- 4 holes for M4 Screws
- 1 for M5 Screws
- 4 for M6 Screws
and on the back i made 6x M3 holes so you can attach another stuff to this "turbine".
Print Settings:
- i printed mine with 0.2 height and 0.4 width, but i should work with another settings.
- Supports? Not needed but… on some printers maybe?
- This was printed on a Custom CoreXY Printer, so the gaps and clearances that I designed in the model might not be optimal for your printer!
Print Time: (on my Printer)
- RearDuct: 4h41m
- FrontDuct: 1h40m
- Turbine: 1h51m