1 / 3
Fence for gravel next to drain - Version 2.0 — zdjęcie 1
1 / 3

Fence for gravel next to drain - Version 2.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is version 2.0 of a a small fence to avoid gravel falling into a drain.

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
163
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Version 2.0

This is version 2.0 of Fence for gravel next to drain. I improved the appearance and also the rain throughput. 

 

Intro

I do own a garage with a flat roof.  In order to protect the roof from UV light  coarse gravel has been put on top. The gravel shall not congest the drain, hence I designed a small fence. 

 

Printing

Printed in PETG with 3 perimeters. Also, the tubes have 20 perimeters so that the they are printed in circles.

Printed in white as the fence is exposed to heat especially on the garage roof during summer time.

 

OpenSCAD

The OpenSCAD file has been provided. 

 

Disclaimer

Please use at your own risk. The fence has just (August 2022) been installed on the roof. I have no experience if 

a) the fence will allow enough rain to pass through  under heavy rain conditions

b) the fence is strong enough to keep the gravel away from the drain

c) the fence lifts after some rain because it is printed with 20% infill. This might lead to gravel falling into the drain and congesting it

d) the PETG will melt in very hot summer scenarios

Tagi