Garmin Varia Strap Mount - Assembled Quarter-Turn Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount to allow a Garmin Varia to be fitted to the blinky loop/LED light loop commonly found on saddle bags…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 968
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a mount to allow a Garmin Varia to be fitted to the blinky loop/LED light loop commonly found on saddle bags and cycling messenger bags/rucksacks. This version accepts a ready-made quarter turn mount plate that you can buy cheaply from EBay/Amazon/AliExpress (it's designed for the type that includes the metal screw inserts). There is also an alternative version that has the quarter-turn mount designed by elmanu included in the print available.
There are three needed parts - the main mount, a spacer and the rear piece. The main mount comes in angle options from 5 degrees up to 45 degrees (the fillet details go a bit strange for the 5 degree option); for my saddle bag and rucksack, I found that 15 or 20 degrees was right. Screwing the mount plate on might prove difficult for the larger angle options because of the angle. The spacer and rear piece both have "narrow" and "wide" options; these give options for different thickness of the strap to which it will attach. A single-thickness ordinary piece of webbing will need both "narrow" options, whereas a double-thickness strap should use both "wide" options. They can be mixed (one narrow, one wide) to give an intermediate option.
The mount requires 4 M3x8 socket cap bolts and 2 M3 Nylock nuts for assembly.
Category: Sport & Outdoors