Garmin Varia Strap Mount - Printed Quarter-Turn Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount to allow a Garmin Varia to be fitted to the blinky loop/LED light loop commonly found on saddle bags…
- Ocena
- 4,5 / 5
- Polubienia
- 64
- Pobrania
- 418
- Wydruki
- 6
- Wyświetlenia
- 2384
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a mount to allow a Garmin Varia to be fitted to the blinky loop/LED light loop commonly found on saddle bags and cycling messenger bags/rucksacks. This version has the quarter-turn mount designed by El Manu included in the print. There is also an alternative version that accepts a ready-made quarter turn mount plate that you can buy cheaply from EBay/Amazon/AliExpress.
There are three needed parts - the main mount, a spacer and the rear piece. The main mount comes in angle options from 5 degrees up to 45 degrees (the fillet details go a bit strange for the 5 degree option); for my saddle bag and rucksack, I found that 15 or 20 degrees was right. The spacer and rear piece both have "narrow" and "wide" options; these give options for different thickness of the strap to which it will attach. A single-thickness ordinary piece of webbing will need both "narrow" options, whereas a double-thickness strap should use both "wide" options. They can be mixed (one narrow, one wide) to give an intermediate option.
The mount requires 2 M3x8 socket cap bolts and 2 M3 Nylock nuts for assembly.
Category: Sport & Outdoors