Classic Corn Sheller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on the classic corn sheller. Print with the wide, thin edge against the build plate using a thin brim…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 139
- Wydruki
- 5
- Wyświetlenia
- 585
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is my take on the classic corn sheller. Print with the wide, thin edge against the build plate using a thin brim as support. I suggest a more rugged material such as PLA+ or ABS. As always make sure your machine is dialed in and your layer adhesion is good.
I suggest at least a 1mm wall thickness with 20 to 25% infill.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.1mm to .2mm
Infill:
greater than 20%
Filament: Inland PLA+ or ABS any
Notes:
Print with large, thin end on the build plate.
Category: Outdoor & Garden