Classic Corn Sheller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my take on the classic corn sheller. Print with the wide, thin edge against the build plate using a thin brim…
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 139
- Makes
- 5
- Views
- 585
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This is my take on the classic corn sheller. Print with the wide, thin edge against the build plate using a thin brim as support. I suggest a more rugged material such as PLA+ or ABS. As always make sure your machine is dialed in and your layer adhesion is good.
I suggest at least a 1mm wall thickness with 20 to 25% infill.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.1mm to .2mm
Infill:
greater than 20%
Filament: Inland PLA+ or ABS any
Notes:
Print with large, thin end on the build plate.
Category: Outdoor & Garden