Sorting Hat Bottle Opener Base British Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Harry Potter inspired bottle opener
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Toddanglin's design where i increased the size of the hole to fit a British penny.
BEWARE
There are two types of British pennies; one is made og bronze and one is made og Copper plated steel, and the height of these are different. Make sure to pick the right one
Bronze: 1.52mm
Copper-plated steel: 1.65mm
Printing instructions (from toddaglin)
Opening a bottle puts lots of strain on the print, so use stronger settings than usual to avoid tearing the print apart the first time you use it. (Ask me how I know…)
Suggested settings with PLA:
- At least 25% infill with gyroid or cubic pattern (not unreasonable to use 100% infill for this application)
- 0.2 mm or better layer height
- 6 top/bottom solid layers
- 4 shells/walls
When slicing, add a pause just before the coin slot is covered so you can insert a penny (GBP). The coin will be permanently encased in the print (no glue required).