Sorting Hat Bottle Opener Base British Version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Harry Potter inspired bottle opener
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Toddanglin's design where i increased the size of the hole to fit a British penny.
BEWARE
There are two types of British pennies; one is made og bronze and one is made og Copper plated steel, and the height of these are different. Make sure to pick the right one
Bronze: 1.52mm
Copper-plated steel: 1.65mm
Printing instructions (from toddaglin)
Opening a bottle puts lots of strain on the print, so use stronger settings than usual to avoid tearing the print apart the first time you use it. (Ask me how I know…)
Suggested settings with PLA:
- At least 25% infill with gyroid or cubic pattern (not unreasonable to use 100% infill for this application)
- 0.2 mm or better layer height
- 6 top/bottom solid layers
- 4 shells/walls
When slicing, add a pause just before the coin slot is covered so you can insert a penny (GBP). The coin will be permanently encased in the print (no glue required).