Screw Cap Container - PET Bottle Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small container for all the odds and ends that come with being a maker. Pop bottle cap thread size.
- Ocena
- 5 / 5
- Polubienia
- 366
- Pobrania
- 1557
- Wydruki
- 26
- Wyświetlenia
- 5442
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a small container for all the odds and ends that come with being a maker.
The size of the cap is matched to the commercially available PET pop bottle caps.
There are also models for printable caps in case you don't have any pop caps laying around
Three types are available: normal type, slit type (slit width 1 mm), and knurled type.
Please enjoy by combining!
The size is 30 mm in outer diameter / 23 mm in inner diameter.
It may be a mini silica gel case or a storage case for 608ZZ bearings (4 pieces).
Print Settings:
Material: Any (PLA, PETG, ABS)
Resolution: 0.16mm
Shells: 3
Infill: 30%
Supports: None
Original file: https://www.thingiverse.com/thing:4900080