1 / 2
RC 1:16 with Arduino and NRF24L01 — zdjęcie 1
1 / 2

RC 1:16 with Arduino and NRF24L01

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

had a RC shell from the Nikko RC series and wanted control from Arduino used this model's steering design and mostly…

Ocena
0 / 5
Polubienia
10
Pobrania
55
Wydruki
0
Wyświetlenia
889
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

had a RC shell from the Nikko RC series and wanted control from Arduino

used this model's steering design and mostly scaled the parts from 1:28 to 1:16 (175%) and did the necessary changes for a 1:16 scale model.

  • use M3x10, M3x16 and M3x20 for assembly
  • use M4x20 for front wheels with a spacer
  • use M4x120 for rear axle with 2 gears, and one square nut per wheel (see model)

!! use the original model's steering components scaled to 175%: left/right hub and steering arm

source code and schematics to follow via github.

!! it also requires a remote built with Arduino, like the one listed here https://github.com/lmirel/eWall-E_r

--

rims and tires are from this https://www.thingiverse.com/thing:466922 scaled from 1:10 to 1:16 (see original notes for printing).

!! the tire is original so DO SCALE it to 65% for printing with flexible filament

the rim is already scaled for 1:16 due to modification for the square nut

Category: R/C Vehicles

Tagi