1 / 2
RC 1:16 with Arduino and NRF24L01 — image 1
1 / 2

RC 1:16 with Arduino and NRF24L01

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

had a RC shell from the Nikko RC series and wanted control from Arduino used this model's steering design and mostly…

Rating
0 / 5
Likes
10
Downloads
55
Makes
0
Views
889
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

had a RC shell from the Nikko RC series and wanted control from Arduino

used this model's steering design and mostly scaled the parts from 1:28 to 1:16 (175%) and did the necessary changes for a 1:16 scale model.

  • use M3x10, M3x16 and M3x20 for assembly
  • use M4x20 for front wheels with a spacer
  • use M4x120 for rear axle with 2 gears, and one square nut per wheel (see model)

!! use the original model's steering components scaled to 175%: left/right hub and steering arm

source code and schematics to follow via github.

!! it also requires a remote built with Arduino, like the one listed here https://github.com/lmirel/eWall-E_r

--

rims and tires are from this https://www.thingiverse.com/thing:466922 scaled from 1:10 to 1:16 (see original notes for printing).

!! the tire is original so DO SCALE it to 65% for printing with flexible filament

the rim is already scaled for 1:16 due to modification for the square nut

Category: R/C Vehicles

Tags