Ender 3 Pro Wire Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will cover some of the rough edges where the Ender 3 Pro is cut to pass wires to the control board.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 105
- Wydruki
- 3
- Wyświetlenia
- 610
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently received an Ender 3 Pro for my Birthday from my son, second printer is always nice. :)
When putting it together I noticed the aluminum extrusion had been cut to allow the wires to reach the main-board. This was a little concerning as the Power Supply wires were right against the sharp edges of the cut aluminum extrusion.
Nothing fancy but hopefully this will help others.
I am using PLA for this, we will see how it holds up.
Printed on Ender 3 Pro
0.24 Layer height using the PrusaSlicer Ender 3 Pro printer setup.
Remember to stay safe with your printer and try to protect those power wires etc.