1 / 7
Adjustable Length Bead Loom — zdjęcie 1
1 / 7

Adjustable Length Bead Loom

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A bead loom with variable lengh.

Ocena
0 / 5
Polubienia
46
Pobrania
99
Wydruki
1
Wyświetlenia
1058
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bead loom designed to make from bracelets up to collars. It has a central moving piece that allows you to adjust the length of the working area, using a threaded rod. Also, the warp needs no finishing. Just attach the thread to a pin, build the warp between the two steel wires, attach the other end to another pin. make your art, insert the terminals with some glue, and pull the stainless steel wires aside, freeing the woven piece.

Extra parts needed:
- 1 x 33 cm x 6 mm (¼ inch) threaded rod
- 2 x 28 cm x 8 mm aluminum or stainless steel rods
- 1 x 6 mm (or ¼ inch) wood insert nut
- 1 x 6 mm (or ¼ inch) self locking nut
- 2 pieces of stainless steel soldering rods (wires) bigger than 12 cm
- Some epoxy glue
 

Tagi