Adjustable Length Bead Loom
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bead loom with variable lengh.
- Rating
- 0 / 5
- Likes
- 46
- Downloads
- 99
- Makes
- 1
- Views
- 1,054
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bead loom designed to make from bracelets up to collars. It has a central moving piece that allows you to adjust the length of the working area, using a threaded rod. Also, the warp needs no finishing. Just attach the thread to a pin, build the warp between the two steel wires, attach the other end to another pin. make your art, insert the terminals with some glue, and pull the stainless steel wires aside, freeing the woven piece.
Extra parts needed:
- 1 x 33 cm x 6 mm (¼ inch) threaded rod
- 2 x 28 cm x 8 mm aluminum or stainless steel rods
- 1 x 6 mm (or ¼ inch) wood insert nut
- 1 x 6 mm (or ¼ inch) self locking nut
- 2 pieces of stainless steel soldering rods (wires) bigger than 12 cm
- Some epoxy glue