1 / 6
The Benchy Cali-Trailer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple trailer for the Benchy that is designed to test for a few things like, cooling, bed adhesion and bridging.
- Ocena
- 4,952 / 5
- Polubienia
- 401
- Pobrania
- 1848
- Wydruki
- 23
- Wyświetlenia
- 4820
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 23) (Komentarze: 26)Remiksy (0)Kolekcje (462)Powiązane
Works with Benchy and the E3D cart - https://www.printables.com/model/320875-e3d-cart-for-towing-the-benchy-and-cali-trailer
A simple little trailer for the benchy that focusses on calibration for unsupported overhangs, bridging, linear advance, and bed adhesion. It also includes a 0.2mm tolerance test if you're up for the challenge.
- Bridging - there are 5 bridges in the main body of the trailer of varying lengths.
- Overhangs - More challenging than the benchy as they quite thin.
- Linear advance - The sharp edges of the trailer are a good spot to identify issues with linear advance.
- Bed adhesion - Very small bed area for adhesion.
- Tolerance test. The wheels can move separately and have 0.2mm clearance. However, they are very small so consider this a challenge, not a serious calibration.